Our plant has a Complete Setup for Auto-Insertion, SMT Line, Manual Insertion Line, Touch Up Line and Assembly Line within the covered area of Approx. lOOOOsq. Ft.
AUTO INSERTION FACILITY
A.I. line consists of
- Panasonic make jumper machine: Machine capable of handling 18000CPH with pitch ranging from 5.0-20mm.
- Sequencer machine: for the re-taping of electronic components.
- Two Universal make inserters: Each inserter is capable of handling 12000CPH for axial components, as a rated capacity.
- Two PANASONIC make radial machines: Each machine is capable of handling 6000CPH for the radial components.
SMT LINE FACILITY
SMT Line consists of:
- Solder Paste Printer: Printer is capable of handling 0.35mm pitch with ease & good repeatability.
- Glue Dispenser: Panasonic make with a rated capacity of 35000CPH is also in the facility as against a trend of glue printing now a days.
- Chip shooter: Panasonic make with a rated capacity of 36000CPH for various components from 3216-1005 to diodes, power transistor & SOP’s.
- Fine Pitch Placer: Panasonic make with rated capacity of 5000CPH capable of handling pitch from 0.35mm onwards & other critical components.
- Ref low Oven Tektron & Tamura 5Zone & 7Zone respectively.
MANUAL, TOUCHUP & ASSEMBLY LINE FACILITY
- The facility has two Manual-Insertion lines of around 10m each, with the facility of chain conveyor having a variable speed mechanism.
- Also there is a separate touch up line of around 13m, which is again motor driven with variable speed adjustment.
- The line also has a Japanese wave soldering machine YAKOTA make which is again with chain conveyor.
- There is a static assembly line of around 13m capable of handling various product line.